View NE3511S02-T1C_8230946.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

to our customers, old company name in catalogs and other documents on april 1 st , 2010, nec electronics corporation merged with renesas technology corporation, and renesas electronics corporation took over all the business of both companies. therefore, although the old company name remains in this document, it is a valid renesas electronics document. we appreciate your understanding. renesas electronics website: http://www.renesas.com april 1 st , 2010 renesas electronics corporation issued by: renesas electronics corporation (http://www.renesas.com) send any inquiries to http://www.renesas.com/inquiry.
notice 1. all information included in this document is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas el ectronics products li sted herein, please confirm the latest product information with a renesas electronics sales office. also , please pay regular and careful attention to additional and different information to be disclosed by rene sas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electroni cs products or techni cal information descri bed in this document . no license, express, implied or otherwise, is granted hereby under any patents, copyri ghts or other intell ectual property right s of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any re nesas electronics product, wh ether in whole or in part . 4. descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully re sponsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the proc edures required by such laws and re gulations. you should not use renesas electronics products or the technology described in this docum ent for any purpose relating to mil itary applicati ons or use by the military, including but not l imited to the development of weapons of mass de struction. renesas electronics products and technology may not be used for or incor porated into any products or systems whose manufacture, us e, or sale is prohibited under any applicable dom estic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing th e information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. renesas electronics products ar e classified according to the following three quality grades: ?standard?, ?high quality?, an d ?specific?. the recommended applications for each renesas electronics product de pends on the product?s quality grade, as indicated below. you must check the qua lity grade of each renesas electronics pr oduct before using it in a particular application. you may not use any renesas electronics produc t for any application categorized as ?speci fic? without the prior written consent of renesas electronics. further, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. re nesas electronics shall not be in any way liable for any damages or losses incurred by you or third partie s arising from the use of any renesas electronics product for a n application categorized as ?specific? or for which the product is not intende d where you have failed to obtain the prior writte n consent of renesas electronics. the quality grade of each renesas electronics product is ?standard? unless otherwise expressly specified in a renesas electr onics data sheets or data books, etc. ?standard?: computers; office equipmen t; communications e quipment; test and measurement equipment; audio and visual equipment; home electronic a ppliances; machine tools; personal electronic equipmen t; and industrial robots. ?high quality?: transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; an ti- crime systems; safety equipment; and medical equipment not specif ically designed for life support. ?specific?: aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support device s or systems), surgical im plantations, or healthcare intervention (e.g. excision, etc.), and any other applicati ons or purposes that pose a di rect threat to human life. 8. you should use the renesas electronics pr oducts described in this document within the range specified by renesas electronics , especially with respect to the maximum ra ting, operating supply voltage range, movement power volta ge range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions o r damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its produc ts, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate a nd malfunctions under certain use conditions. fur ther, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physic al injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safe ty design for hardware and software in cluding but not limited to redundancy, fire control and malfunction prevention, appropri ate treatment for aging degradation or an y other appropriate measures. because the evaluation of microcomputer software alone is very difficult , please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesa s electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regul ate the inclusion or use of c ontrolled substances, including wi thout limitation, the eu rohs directive. renesas electronics assumes no liability for damage s or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any form, in w hole or in part, without prio r written consent of renes as electronics. 12. please contact a renesa s electronics sales office if you have any questi ons regarding the informat ion contained in this document or renesas electroni cs products, or if you have any other inquiries. (note 1) ?renesas electronics? as used in this document means renesas electronics corporation and also includes its majority- owned subsidiaries. (note 2) ?renesas electronics product(s)? means any product developed or manufactured by or for renesas electronics.
data sheet caution observe precautions when handling because these devices are sensitive to electrostatic discharge. the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. hetero junction field effect transistor ne3511s02 x to ku band super low noise amplifier n-channel hj-fet document no. pg10642ej01v0ds (1st edition) date published october 2006 ns cp(n) printed in japan 2006 features ? super low noise figure and high associated gain nf = 0.30 db typ., g a = 13.5 db typ. @ f = 12 ghz ? micro-x plastic (s02) package applications ? x to ku-band dbs lnb ? other x to ku-band communication systems ordering information part number order number pack age quantity marking supplying form NE3511S02-T1C NE3511S02-T1C-a 2 kpcs/reel b ne3511s02-t1d ne3511s02-t1d-a s02 (pb-free) 10 kpcs/reel ? 8 mm wide embossed taping ? pin 4 (gate) faces the perforation side of the tape remark to order evaluation samples, contact your nearby sales office. part number for sample order: ne3511s02 absolute maximum ratings (t a = +25 c) parameter symbol ratings unit drain to source voltage v ds 4 v gate to source voltage v gs ? 3 v drain current i d i dss ma gate current i g 100 a total power dissipation p tot note 165 mw channel temperature t ch +125 c storage temperature t stg ? 65 to +125 c note mounted on 1.08 cm 2 1.0 mm (t) glass epoxy pcb
data sheet pg10642ej01v0ds 2 ne3511s02 recommended operating conditions (t a = +25 c) parameter symbol min. typ. max. unit drain to source voltage v ds 1 2 3 v drain current i d 5 10 20 ma input power p in ? ? 0 dbm electrical characteristics (t a = +25 c, unless otherwise specified) parameter symbol test conditions min. typ. max. unit gate to source leak current i gso v gs = ? 3 v ? 0.5 10 a saturated drain current i dss v ds = 2 v, v gs = 0 v 20 40 70 ma gate to source cutoff voltage v gs (off) v ds = 2 v, i d = 100 a ? 0.2 ? 0.7 ? 1.7 v transconductance g m v ds = 2 v, i d = 10 ma 50 65 ? ms noise figure nf v ds = 2 v, i d = 10 ma, f = 12 ghz ? 0.30 0.45 db associated gain g a 12.5 13.5 ? db
data sheet pg10642ej01v0ds 3 ne3511s02 typical characteristics (t a = +25 c, unless otherwise specified) total power dissipation p tot (mw) ambient temperature t a (c) vs. ambient temperature total power dissipation 250 200 150 100 50 0 50 100 150 200 250 80 60 40 20 0 ?2.0 ?1.0 0 drain current i d (ma) gate to source voltage v gs (v) drain current vs. gate to source voltage v ds = 2 v drain current i d (ma) minimum noise figure nf min (db) associated gain g a (db) associated gain vs. drain current minimum noise figure, drain current i d (ma) drain to source voltage v ds (v) drain to source voltage drain current vs. 100 20 40 60 80 0 1.0 2.0 v gs = 0 v ? 0.2 v ? 0.4 v ? 0.6 v mounted on glass epoxy pcb (1.08 cm 2 1.0 mm (t) ) frequency f (ghz) minimum noise figure nf min (db) associated gain g a (db) associated gain vs. frequency minimum noise figure, f = 12 ghz v ds = 2 v nf min 10 15 0 5 20 25 1.2 1.4 1.6 0.6 0.8 1.0 0.2 0.4 0.0 12 14 16 6 8 10 2 4 0 g a nf min g a v ds = 2 v i d = 10 ma 2.0 1.2 1.4 1.6 1.8 0.6 0.8 1.0 0.2 0.4 0.0 25 15 10 5 20 0 8 6 02 14 12 10 16 20 4 18 remark the graphs indicate nominal characteristics.
data sheet pg10642ej01v0ds 4 ne3511s02 s-parameters s-parameters/noise parameters are provided on our web site in a form (s2p) that enables direct import to a microwave circuit simulator without keyboard input. click here to download s-parameters. [rf and microwave] [device parameters] url http://www.ncsd.necel.com/microwave/index.html
data sheet pg10642ej01v0ds 5 ne3511s02 rf measuring layout pattern (reference only) (unit: mm) 13.0 2.80 l2?ux ver. 1 1.7 mm/r.p. 2.60 2.06 2.6 1.7 1.7 reference plane (calibration plane) reference plane (calibration plane) 6.0 0.64 0.74 2.06 0.54 0.3 th rt/duroid 5880/rogers t = 0.254 mm r = 2.20 tan delta = 0.0009 @10 ghz
data sheet pg10642ej01v0ds 6 ne3511s02 package dimensions s02 (unit: mm) (top view) (side view) (bottom view) 0.5 typ. 2.60.1 0.65 typ. 3.20.2 1 2 3 4 2.20.2 3.20.2 1.7 1.5 max. 0.150.05 3 4 1 2 2.20.2 2.20.2 pin connections 1. source 2. drain 3. source 4. gate b
data sheet pg10642ej01v0ds 7 ne3511s02 recommended soldering conditions this product should be soldered and mounted under the following recommended conditions. for soldering methods and conditions other than those recomm ended below, contact your nearby sales office. soldering method soldering conditions condition symbol infrared reflow peak temperature (package surface temperature) : 260 c or below time at peak temperature : 10 seconds or less time at temperature of 220 c or higher : 60 seconds or less preheating time at 120 to 180 c : 120 30 seconds maximum number of reflow processes : 3 times maximum chlorine content of rosin fl ux (% mass) : 0.2%(wt.) or below ir260 partial heating peak temperatur e (terminal temperature) : 350 c or below soldering time (per side of device) : 3 seconds or less maximum chlorine content of rosin fl ux (% mass) : 0.2%(wt.) or below hs350 caution do not use different soldering met hods together (except for partial heating).
data sheet pg10642ej01v0ds 8 ne3511s02 the information in this document is current as of october, 2006. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e 02. 11-1 (1) (2) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific":
0604 nec compound semiconductor devices hong kong limited e-mail: contact@ncsd-hk.necel.com hong kong head office tel: +852-3107-7303 fax: +852-3107-7309 taipei branch office tel: +886-2-8712-0478 fax: +886-2-2545-3859 korea branch office tel: +82-2-558-2120 fax: +82-2-558-5209 nec electronics (europe) gmbh http://www.eu.necel.com/ tel: +49-211-6503-0 fax: +49-211-6503-1327 california eastern laboratories, inc. http://www.cel.com/ tel: +1-408-988-3500 fax: +1-408-988-0279 compound semiconductor devices division nec electronics corporation url: http://www.ncsd.necel.com/ for further information, please contact ne3511s02 caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinanc es when disposing of the produc t. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (wit h a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industria l waste and household garbage, and ensure that the product is controlled (as industria l waste subject to special c ontrol) up until final disposal. ? do not burn, destroy, cut, crush, or chemically di ssolve the product. ? do not lick the product or in any way allow it to enter the mouth.

▲Up To Search▲

Price & Availability of NE3511S02-T1C

	To Download NE3511S02-T1C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .